#4A CARLTON 8 x 19" Radial Arm Drill Press 57 Box Table, #6 Morse Taper, Electric Clamping, 20 H.P. Start Price USD 29,500.00 Current Price USD 29,500.00 Time Left - Bid Count 0 Buy It Now Price - Reserve Price - Start Time Thursday, June 26, 2008 End Time Sunday, July 06, 2008 Location Hauppauge, New York See more about '#4A CARLTON 8 x 19" Radial Arm Drill Press 57' Description Preowned   8' x 19"   CARLTON   Radial Arm Drill Press,   Model 4A,   S/N   4A-4365 (New   1957) Column diameter Arm length Minimum/Maximum distance from face of column to face of column Taper in spindle Spindle diameter Spindle traverse Horizontal traverse of head on arm Vertical traverse of arm on column Minimum/Maximum distance, spindle to base Height of base Working surface of base (36) Spindle speeds (18) Feeds Tap leads Maximum height over head Maximum height over column cap 19" 8' 13.25"/8' #6 Morse 4" 20" 82-3/4" 43-1/2" 14-1/2" /78" 10" 50" x 77" 15-1,500 R.P.M. .004-.125 I.P.R. 8, 11-1/2, 14, 18 T.P.I. 146" 141" Equipped with:T-slotted base 49-1/4" L-R x 39-1/8" F-B x 25-1/2" high t-slotted box table with 49-1/4" L-R x 21-3/8" high t-slotted side Automatic spindle reverse for tapping operations Electrically actuated clamping of arm on column Power elevation of arm on column Power rapid traverse of head on arm Coolant pump in base 20 H.P. 3/60/220-440 volt spindle drive motor and electrical controls Machine is wired for 440 volt operation. Approximate Weight:  29,000 Lbs.  Approximate Dimensions:  174" L-R x 53" F-B x 141" High  Condition:  Very Good  (F.O.B. Truck, Hauppauge - Long Island, NY)    Place a Bid!