*NIB* Lot of 10 DISH 1000.2 w/DPP TRIPLE OUTPUT LNB Still in Factory Boxes!!! FREE SHIP!!! Start Price USD 700.00 Current Price USD 700.00 Time Left - Bid Count 0 Buy It Now Price - Reserve Price - Start Time Sunday, November 16, 2008 End Time Sunday, November 23, 2008 Location Aberdeen, SD See more about '*NIB* Lot of 10 DISH 1000.2 w/DPP TRIPLE OUTPUT LNB' Description This auction includes the following items BRAND NEW, SEALED in ORIGINAL BOX and FREE SHIPPING!!!!!!!  10 Dish 1000.2 Reflectors  8  Dish 1000.2 Integrated LNBFs 10 Dish 1000.2 Skew Plates / Support Arms 10 Dish 1000.2 Integrated LNBF Brackets 10 Dish 1000.2 Masts and Footplate 10 Dish 1000.2 Hardware Packs IT ONLY INCLUDES 8 LNBS!!!! PART NUMBERS• Reflector #142416 • Mast/foot #142408• Backing structure #150310 • Integrated Adapter Bracket (for DPP 1000.2 LNBF) #144577• DPP 1000.2 LNBF #145511 (8) HIGHLIGHTS• Receives signal from the 110°,119° and 129° orbital locations.• Antenna reflector size is slightlylarger than a DISH 1000.• Standard installation uses DISHPro Plus 1000.2 LNBF andIntegrated Adapter Bracket.− Three receiver output ports.− One LNB input port for afourth orbital location.− Compatible with DISH Prosingle-orbital LNBFs or DISHNetwork bandstacked LNBFs,and DISH Pro Plus 44 switch.• Optional installation: three Dual(or Single) LNBFs with Three-LNBF Bracket and a switch. Introduction The DISH 1000.2 satellite dish antenna uses an integrated three orbital location DISH Pro Plus LNBF to receive signal from 110°W, 119°W, and 129°W DBS orbital locations. The DISH 1000.2 reflector is slightly larger than a DISH 1000 reflector. For additional information and detailed installation instructions, refer to DISH 1000.2  (Parts are not interchangeable with other dishes) Three receiver output ports support a combination of DISH Pro Plus, DISH Pro, and Legacy receivers, including up to three DISH Pro Plus (dual-tuner) receivers when used with DISH Pro Plus Separators. While Legacy receivers are supported without a DISH Pro Adapter, at least one DISH Pro or DISH Pro Plus receiver must be connected and powered at all times to power the LNBF. LNB IN port supports adding a fourth orbital location. The LNB IN port is operational only when receiver output ports are connected directly to satellite receivers. It is disabled when the receiver output ports are connected to a switch. The default output of the receiver ports is 119° on PORT 1, 110° on PORT 2 and 129° on PORT 3. Note that the output ports do not follow the feed horns, but rather allow for PORT 1 to be used for peaking on 119°, similar to other LNBFs. On the Installation Summary screens, the DPP 1000.2 LNBF may display as “DPP Twin” or “DPP Triple” prior to the receiver’s software download. After downloading software, it will display as “1K.2” and “DPP 1K.2”. Legacy receivers will display the LNBF as “SW64” when the LNB IN port is unused or “SW21-4Sat” when a fourth orbital location is connected (if supported by that receiver). Installation Tips Peak signal on 119°W (signal at LNBF output PORT 1) after setting the skew angle. Do not try to balance all three satellite signal levels. If the peaking meter does not produce at least 600 mA to power the DPP 1000.2 LNBF, connect PORT 2 of the LNBF to the SATELLITE IN port of a powered receiver to provide LNBF power while peaking. The DPP 1000.2 LNBF’s Adapter Bracket (included) can be replaced by the Three-LNBF Bracket (sold separately) to allow use of three Dual or Single LNBFs. The Three-LNBF Bracket will not support Twin or Quad LNBFs. The W-Bracket used with the DISH 1000 is not interchangeable with the DISH 1000.2 Three-LNBF Bracket. The Three-LNBF Bracket can also be used temporarily with a Dual or Single for peaking on 119°W. The DISH 1000.2 skew plate has additional skew holes to use when the skew is set to 110 or higher, or 70 or below. Bolts in these skew holes provide additional stability at these extreme angles. Refer to the latest DISH 1000.2 Installation Guide (part number 151255) for additional details. Special Considerations While all DISH Network satellite receivers can be connected to the DISH 1000.2, the following models may not detect and will not support the 129ºW location or a fourth orbital location connected to the DPP 1000.2 LNBF’s LNB In port: 1000, 2000, 3000, 4000, 5000, JVC-DVHS (IRR), and the DishPlayer 7100/7200. Receivers need to download the latest software to view 129°W.   Place a Bid!