DC PRO 200 OZONE GENERATOR AIR PURIFIER MOLD
Gadgets & Other Electronics >>> Air Purifiers >>> Ozone
DC PRO 200 OZONE GENERATOR AIR PURIFIER MOLD

DC PRO 200 OZONE GENERATOR AIR PURIFIER MOLD
Start Price USD 229.00
Current Price USD 229.00
Time Left -
Bid Count 0
Buy It Now Price -
Reserve Price -
Start Time Wednesday, September 03, 2008
End Time Wednesday, September 10, 2008
Location Canton, Ohio

See more about 'DC PRO 200 OZONE GENERATOR AIR PURIFIER MOLD'

Description
200mg / Hr. CORONA DISCHARGE OZONE GENERATOR WITH FULL VARIABLE OUTPUT 12V & 120 Volt Operation!    (330) 497-6900                                                                                                                                        6 YEAR WARRANTY     BRAND NEW! DC PRO 200       Brand New Ozone Generator DC Pro 200 Powerful Machine for the Money.   We also have Five Times the power for $165 more - the DC PRO 970   DC PRO 200 ~ It works in the car, in the house, the cottage, hotel room, boat, it can even work on a battery pack. the uses for this ozone generator are endless. Specifications for DC PRO 200 ozone generator Generation method: Corona discharge utilizing mica plate technology. Supply Gas: Ambient Air Max. zone output: 200 mg/hr Controls: On off rocker switch. Fully variable control for ozone output. Dimensions: 3" H X 5" W X 5.25"L Electrical: 12-13 vdc 1amp from a 120 volt Wall Adapter with North American style plug. Lighter plug also included for use in vehicles etc. (240 volt adapters available on request. Fan Size: 16 cfm Construction: Stainless steel Maintenance: Under normal 24 hr/day use the 200 ozone generator plate should be cleaned every 3 to 6 months using dish soap, water and a tooth brush. Cleaning frequency is highly dependant on the humidity level of the air that the ozone generator receives. Warranty: The PRO 200 is warranted against defects in materials and workmanship for a period of 6 years from date of purchase. Liability is limited to parts and labor only. Shipping is the sole responsibility of the customer. Crystal Air . is not liable for damage caused by shipping, misuse, neglect or lack of regular maintenance. Uses: The DC PRO is a medium size ozone generator designed for use in a room or building up to approx. 750 sq/ft for freshening the air, or shock treat up to about a 100 sq/ft area. This unit does have a variable control for adjusting the output. The output starts at approx. 10 mg/hr and goes up to 200 mg/hr.   INDUSTRY'S BEST AND LONGEST WARRANTY - 6 YEARS  SHOCK TREATMENTS Ozone Shock Treatments are effective for removing harsh odors like smoke, mold, and animal odors. It is useful to "shock treat" an unoccupied room with a large volume of ozone to kill odors & germs. The idea of an ozone shock treatment procedure is to eliminate the contamination and source of the odor from surfaces as well as the air.  Ozone shock treatments can also provide continuous control over recurring contamination or heavily contaminated areas.   General Ozone Shock Treatment Procedure: The ozone generator should be placed pointing in the direction of the problem area. Strong fans should be placed throughout the area being treated to provide maximum ozone distribution and improved penetration into materials such as carpet. Operate the ozone generator at it's highest capacity for as long as it takes to eliminate the odor problem. In most cases it takes only a few minutes to do a shock treatment. If it is a type of odor that is absorbed in furniture, walls and bedding, for example, cigarette smoke, takes only 30-120 minutes with the proper sized ozone generator. After the shock treatment procedure is complete, air out the room, if the odor is expected to continue place an ozone generator and monitor controller permanently in the area operating at a low level. Severe cases may require a 24 + hour treatment.  Ozone Shock Treatments should be done in rooms when no people, animals, or even plants are present. To do this, an unoccupied zone should be established with no air infiltration; no leaks through ventilation systems, windows, or doors.  Also, by sealing the area, you can be sure the shock treatment will be successful.  Ozone, at shock treatment levels will kill mold spores and obstruct future growth. If you can smell mold, usually there is mold, or air-borne mold spores. Negative Ion generators are not capable of killing or eliminate mold spores or germs.   SHIPPING : Fast Shipping charge of $19.90 Paypal & All all Credit Cards are Gladly Accepted 330-497-6900 or Toll Free: 866-225-3858 Hours: 7:30 AM - 11:00 PM  Everyday                                                                                 stwflwar

Place a Bid!


Search
 

 
eBay Developers Program Member

 [home] [sitemap]
12/1/2008 12:34:21 PM