Electro-Voice XLD281-WH Line Array/EV CPS 2.6 Amplifier
| Start Price |
USD 9,500.00 |
| Current Price |
USD 9,500.00 |
| Time Left |
- |
| Bid Count |
0 |
| Buy It Now Price |
- |
| Reserve Price |
- |
| Start Time |
Friday, September 05, 2008 |
| End Time |
Wednesday, September 10, 2008 |
| Location |
Madison, AL |
|
See more about 'Electro-Voice XLD281-WH Line Array/EV CPS 2.6 Amplifier'
|
Description
For Immediate Sale: (4) Electro-Voice XLD281-WH 3-Way, High-Output, Very Compact Line-Array speakers * The speakers are new, currently installed in our sanctuary but not being used.* Technical Specifications: Freq. Response1(-3 dB): 75 Hz-18 kHz Freq. Range1(-10 dB): 60 Hz-20 kHz Max Calculated SPL2:143 dB Cont., 149 dB Pk Horizontal Coverage: 120° Vertical Coverage: Array Dependant, Software Definable Rigging: Fully Captive Aluminum, 1° increments, 16 elements with 8 to 1 Safety Factor LF1 Power Handling: 200W Cont., 800W Peak LF2 Power Handling: 200W Cont., 800W Peak HF Power Handling: 80W Cont., 320W Peak Biamp LF1/HF Power Handling: 200W Cont., 800W Peak LF2 - 200W Cont., 800W Peak Bandpass Freq3:50 - 250 Hz LF1 to HF Crossover Freq3: 1760 Hz LF1 Passband: Recommended Amplifier: 1 x 8" DVN2080, 16 ohms EV CP3000S LF2 Passband: Recommended Amplifier: 1 x 8" DVN2080, 16 ohms, EV CP3000S HF Passband: Recommended Amplifier: 2 x ND2S-8, 16 ohms EV CP3000S Biamp LF1/HF Passband: Recommended Amplifier: 16 ohms, EV CP3000S Connectors: 2 x NL8 Enclosure Material: Birch plywood w/EVCoatTM Grille: Zinc plated steel with powdercoat paint Environmental Spec: IEC 529 IP24, MIL 810 Dim (HxWxD): 9.90" x 28.58" x 14.52" (251 x 726 x 369 mm) Net Weight: 48 lbs (21.8 kg) Shipping Weight: 51 lbs (23.1 kg) (1) Electro-Voice CPS 2.6 High-Efficient, Lightweight, Two-Channel Power Amplifier. * This amp is also new, currently mounted in our amp rack but not being used.* Technical Specifications: Load Impedance: 2 Ohms 4 Ohms 8 Ohms Maximum Midband Output Power (THD = 1%, 1 kHz, Dual Channel): 900W 600W 350W Rated Output Power (THD = 0,1 %, 20 Hz - 20 kHz): - 500W 250W Maximum Bridged Output Power (THD = 1%, 1 kHz): - 1800W 1200W Maximum RMS Voltage Swing (THD = 1%, 1 kHz): 62V Power Bandwidth (THD = 1%, 1 kHz, Half Power @ 4 Ohms): 10 Hz - 60 kHz Voltage Gain ref. 1 kHz: 32.0 dB Input Sensitivity (@ Rated Power, 8 Ohms, 1 kHz): +3.2 dBu (1.12 Vrms) THD @ Rated Output Power (<0.1%, CPS2T@100V): < 0.05% IDE-SMTP (60 Hz, 7 kHz): <0.02% DIM 30 (3.15 kHz, 15 kHz): <0.01% Maximum Input Level: +22 dBu (9.76 Vrms) Crosstalk (ref. 1 kHz, Rated Output Power): <-80 dB Frequency Response (+/- 1 dB, ref. 1 kHz): 15 Hz - 40 kHz Input Impedance Active Balanced: 20 kOhms Damping Factor @ 1 kHz: >300 Slew Rate: 35 V/us Signal-to-Noise Ratio (A-Weighted): 105.5 dB Power Requirements1: 240V, 230V, 220V, 120V, or 100V; 50 - 60 Hz (Factory Configured) Power Consumption: 500W Power Dissipation (1/8 Max. Output Power @ 4 Ohms): 260W (885 BTU/hr) Protection: Audio Limiters, High Temperature, DC, HF, Back-EMF, Peak Current Limiters, Inrush Current Limiters, Turn-On Delay Cooling: Front-to-Rear, 3-Stage Fans Dimensions (W x H xD): 483mm x 88.1mm x 368.8mm (19” x 3.5” x 15.22”) Net Weight: 15.0 kg (33.0 lbs) Shipping Weight: 16.5 kg (36.3 lbs) Our church had a system designed in our new sanctuary by a sound company....and to make a long story short, we waisted money on a design that didn't make sense. Once we moved into the church and paid someone else to fix part of our problems this array was deactivated from test mode, never being used. They've been hanging in our ceiling for a year now with no use. Its set up for demo if someone wants to hear them. They sound awesome!!! If I had my way we would have used a whole system of these arrays in our sanctuary. Retail on this package is $16,200.00, so we're taking a loss to get rid of then. Please email me with any and all questions. I can't imagine what shipping would be on these (even though the cabinets are light), just email me. Thanks.
Place a Bid!
|
|