Hand made Birch plywood horn 1" for Altec A7 system Start Price USD 750.00 Current Price USD 750.00 Time Left - Bid Count 0 Buy It Now Price - Reserve Price - Start Time Friday, October 10, 2008 End Time Sunday, November 09, 2008 Location ansan, GYEONGGI-DO See more about 'Hand made Birch plywood horn 1" for Altec A7 system' Description  Here is hand made Birch plywood wood horns for Altec A7 Systems.   usually the woodhorns weak point is  horn adaptersm but this woodhorns adapters fixed 4 bolts (8mm) therfore very hard & steady. See the picture. Sound is very smoothly and clearness , never nervous This auctions only pair of woodhorns and adapters is  for altec 1" driver.      Horn Type : Hyperbolic horn  Cut off frequency : 800Hz   Frequency range : 800Hz to 20KHz  Driver : 1in (2.5cm) throat. Altec 8xxdrivers ,JBL-2425 or TAD-2001 or equivalent  Size : W 504mm, H 145.4mm, D 304mm (inclu. 18mm adapter plate)  Material :  Birch plywood  Finish :  polyurethane varnish .  color: natural wooden.  Four fins(Birch plywood)  are inside the horn .  each horn weights  11lbs more.100% handmade in korea by monosound.   I will ship wordwide . but if you are hong kong or Chinese  first contect me.  This woodhorns are made 100% hand made, and no used conditions, we only test and display. this is perfact condition but  here and there very little some scrach but never nervous also not to see. if any question or want more big size picture mail me.   thanks and happy biddiong.   Place a Bid!